View 2SC5592_413205.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Transistors
2SC5592
Silicon NPN epitaxial planar type
For DC-DC converter For various driver circuits Features
* Low collector-emitter saturation voltage VCE(sat) * High-speed switching * Mini type package, allowing downsizing of the equipment and automatic insertion through the tape packing
Unit: mm
0.40+0.10 -0.05 3
1.50+0.25 -0.05 2.8+0.2 -0.3
0.16+0.10 -0.06
1
2
(0.65)
(0.95) (0.95) 1.90.1 2.90+0.20 -0.05 10
Absolute Maximum Ratings Ta = 25C
Parameter Collector-base voltage (Emitter open) Collector-emitter voltage (Base open) Emitter-base voltage (Collector open) Collector current Peak collector current Collector power dissipation * Junction temperature Storage temperature Symbol VCBO VCEO VEBO IC ICP PC Tj Tstg Rating 15 15 5 2.5 10 600 150 -55 to +150 Unit V V V A A mW C C
1.1+0.2 -0.1
1.1+0.3 -0.1
1: Base 2: Emitter 3: Collector EIAJ: SC-59 Mini3-G1 Package
Marking Symbol: 2T
Note) *: Measure on the ceramic substrate at 15 mm x 15 mm x 0.6 mm
Electrical Characteristics Ta = 25C 3C
Parameter Collector-base voltage (Emitter open) Collector-emitter voltage (Base open) Emitter-base voltage (Collector open) Collector-base cutoff current (Emitter open) Forward current transfer ratio * Collector-emitter saturation voltage * Symbol VCBO VCEO VEBO ICBO hFE1 hFE2 VCE(sat) fT Cob ton tstg tf Conditions IC = 10 A, IE = 0 IC = 1 mA, IB = 0 IE = 10 A, IC = 0 VCB = 10 V, IE = 0 VCE = 2 V, IC = 100 mA VCE = 2 V, IC = 2.5 A IC = 1 A, IB = 10 mA IC = 2.5 A, IB = 50 mA Transition frequency Collector output capacitance (Common base, input open circuited) Turn-on time Storage time Fall time VCB = 10 V, IE = -50 mA, f = 200 MHz VCB = 10 V, IE = 0, f = 1 MHz Refer to the switching time measurement circuit 400 280 110 220 180 30 30 100 10 320 MHz pF ns ns ns mV Min 15 15 5 0.1 1 000 Typ Max Unit V V V A
Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. *: Pulse measurement ( 1 ms)
0 to 0.1
0.40.2
5
Publication date: February 2003
SJC00184CED
1
2SC5592
Switching time measurement circuit IB2 IB1 Input RB 470 F
Output RL
PW = 20 s DC 1%
VCC = 5 V
-20IB1 = 20IB2 = IC = 1.5 A
2
SJC00184CED
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the product or technologies as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
2002 JUL
This datasheet has been download from: www..com Datasheets for electronics components.

▲Up To Search▲

Price & Availability of 2SC5592

	To Download 2SC5592 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .